GGG-1384: GG&G FLT Bolt-On Cantilever
SPR Scope Mount - 30mm Integral Rings
The Special Purpose Rifle (SPR) has gained in popularity with shooters in the
civilian and law enforcement community. Our technical advisers advised us that
the scope most often used on SPR rifles is a 30mm low powered variable optic
placed forward on the AR-15/M16 flattop receiver. To meet the specific optic
mounting needs of the SPR shooters, GG&G has introduced their new FLT Scope
Mount With 30mm Integral Rings.
To provide flexibility to the end user, we are offering the FLT Scope Mount in
two configurations; one is the Accucam QD model for those shooters requiring the
ability to quickly remove or install their scope with 1/2 MOA repeatability, and
the other is a semi-permanent bolt on installation, using a standard squeeze
rail configuration side bar and 1/2" hex nuts. Both offer forward scope
mounting. For comparative purposes the SPR Scope Mount places the scope forward
1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight
weighing in at only 5.5 ounces, and is 5 inches long. It is low profile allowing
excellent cheek weld when mounted to the AR-15/M16 flattop upper receiver. The
height from the center-line of the 30mm integral rings to the top of the dovetail
mounting platform is 1.460 inches. The center to center dimension of the rings
is 3.750 inches. Both models are manufactured from 6061 T6 aluminum and Type III
hard anodized matte black to mil-spec.
GG&G FLT Bolt-On Cantilever
SPR Scope Mount
- 30mm Integral Rings.
- 1/2 MOA repeatability
- Height: 1.460 inches (dovetail
to ring center)
- Spacing: 3.750 inches
- Weight: 5.5oz.
- Length: 5.0"
- 6061 T6 aluminum
- Type III hard anodized
-
Made In Arizona USA!